Share on:

Loading

Functioning


OPERATING PRINCIPLE AND GENERAL SPECIFICATIONS


The devices are designed to produce hot water by automatically burning wood.

The hot water is conveyed to the radiators (high temperature) or in-floor radiator panels (low temperature) throughout the house.

The boilers can be integrated into hybrid systems with solar panels, wall-mounted boilers and accumulators, etc., to create advanced heating solutions.

Special kits are available to allow them to produce domestic hot water for the bathroom and kitchen, which can be stored in boilers so as always to be available at the desired temperature.

A wide range of kits are available to solve every installation requirement, and which can be equipped with either closed or open expansion vessels.
If the expansion vessel is of the closed type, the boiler must be fitted with a thermal discharge coil and safety valve.

Wood boilers can also be connected to the existing heating system, whether with closed or open expansion vessel.


GENERAL OPERATIONAL SCHEME


For the scheme specific to your model, refer to the technical data sheet enclosed with the product.
cl_t1_01.jpg

1 =
wood loading and combustion chamber

2 = ash drawer

3 = ash drawer compartment door

4 = secondary air regulator

5 = wood loading door

6 = draw regulator

7 = fumes outlet port for connection to flue

8 = water delivery to system

9 = water return from system

10 = delivery water thermometer