flue connection elements

USEFUL SUGGESTIONS REGARDING INSTALLATION

The output of combustion products from the fireplaces is circular. It is envisioned to allow the use of stainless steel pipes form the Edilkamin range (rigid single-wall or insulated rigid double-wall).

If the flue inlet is not vertical to the fireplace, the fitting between the fireplace and the flue must not have constrictions or inclinations exceeding 45°.

For flues that are not new or too big, piping is recommended via stainless steel pipes with suitable diameter and insulation.

For flues positioned externally, the use of those in stainless steel with insulated double wall is recommended.

The constructive features, in particular regarding mechanical resistance, insulation and gas proofing must be suitable and support a combustion product temperature of at least 450°C. Also consider the indications of the UNI 10683/98 Standard.

Connection to wall on flue already existing in vertical	Connection to wall on flue already existing that is out of alignment
Connection to ceiling on flue already existing in vertical	Connection to ceiling on flue already existing that is out of alignment

EdilKamin SpA - 20020 Lainate (MI) ITALY - Via Mascagni, 7 - Sede legale Via Vincenzo Monti 47 - 20123 Milano
REA 878888 - C.F. , P.IVA e n° Isc. Reg. Imprese di Milano 00192220192 - Cap. Sociale € 4.100.000 I.V.
Leader company in the production of fireplaces, coverings, fireplace heating systems, pellet thermo-stoves, wood and pellet burning stoves, pellets.

WebSite by Lever Plan

EDILKAMIN S.p.A. – Reserves the right to modify the technical and aesthetic features of the elements published on this internet site at any time and without forewarning.