FUNCTIONAL FEATURES
COMMON TO BOTH MODELS
Loading the pellets
Front pellet loading at an ergonomic height without having to extract the firebox (in compliance with the EN 14785 Standard) and without having to climb onto steps to load from the counter-hood, like other product on the market.
Radio control (supplied)
Allows to perform all operations envisioned on the synoptic panel.
Hourly programmer (supplied)
Programs automatic switch on/off at the desired time.
Long-distance switch on (optional)
By connecting a telephonic responder/combiner to the circuit board it is possible to switch the Pellbox at a distance by telephone.
FEATURES EXCLUSIVE TO THE SCF MODEL
• cast iron front panel with slots for the outlet of hot air and housing of the controls and synoptic panel. The projecting external edge is used to hide the joint line between the Pellbox and the filling material of the existing fireplace mouth.
• control panel and synoptic panel (fig. 1)
Practical equipment for the management and control of all functioning phases.
• possibility of also ducting the hot air produced into the adjacent rooms (with relevant fan) as well as emission into the room of installation via a front grill (fig. 2).
• removable front drawer for pellet loading. (fig. 3)
• cast iron firebox block hinged onto a side in order to allow to opening for access to the electro-mechanical parts for maintenance (therefore without having to move the insert) (fig. 4)
• reserve signal, when the level of fuel is such to allow the loading of an entire 15 kg bag of pellets. Tank capacity is 25 kg.
