OPERATING PRINCIPLE AND GENERAL SPECIFICATIONS

The devices are designed to produce hot water by automatically burning wood pellets.

All phases are controlled by the electronic controller's software, which guarantee's high efficiency and low emissions in total safety.

The hot water is conveyed to the radiators (high temperature) or in-floor radiator panels (low temperature) throughout the house.

The boiler stoves can be integrated into hybrid systems with solar panels, wall-mounted boilers and accumulators, etc., to create advanced heating solutions.

Special kits are available to allow them to produce domestic hot water for the bathroom and kitchen, which can be stored in boilers so as always to be available at the desired temperature.

Pellet boiler stoves can also be connected to the existing heating system, whether with closed or open expansion vessel.
A wide range of kits area available for every installation requirement.



GENERAL OPERATIONAL SCHEME


For the scheme specific to your model, refer to the technical data sheet enclosed with the product.

1 = pellet hopper with top loading hatch

2 = screw for conveying the pellets from the hopper to the combustion chamber

3 = screw gearmotor

4 = pellet combustion hearth

5 = electric heating element for igniting the pellet

6 = centrifugal fan for extracting the combustion fumes

7 = ront grille for delivering the hot air to the room, if so desired

8 = synoptic panel for controlling/monitoring the device's operation

9 = combustion air port for connection to external intake

10 = fumes outlet port for connection to flue

11 = tube coils for circulating and heating the water

12 = water delivery to heating system

13 = water return from heating system

14 = closed expansion vessel